Figure I
Fixing the Storage Holder
®
3.8 Fixing the iPod Dock/Storage Station
®
Place the iPod Dock Assembly onto the Bracket
that’s attached to the Column and use a Phillips
screwdriver to fasten 2x screws into the moulding,
ensuring that the Dock is positioned straight before
tightening screws*.
Insert the Storage Buckets into the metal loops and
press down firmly. [See Figure H].
Tools Required -
1 x Philips Head Screwdriver
*Refer to document
135-767-*
for correct
alignment procedures.
3.9 Fixing the Storage Holders
Push the Storage Buckets down firmly into the
Storage Station. [See Figure I].
Figure H
Fixing the iPod Dock
®
Assembly of the 220G
(Continued)
Assembly, Operation & Parts Manual G-Range CV Pg
16
