3.1 Securing the Column
Rest the Column onto something stable e.g. a box
or equivalent, and thread the Cable Loom up
through it, whilst making sure that the loom does
not get trapped.
Next lift the assembled Column up and lean it
against its Mounting Bracket and secure the bolts
into position by hand.
Once in position use an Allen Key to tighten up the
bolts, ensuring that the Column is aligned vertically
and not twisted. [See Figure A].
Tools Required:
10mm Allen Key [M12 Cap Head]
*Refer to document
135-778-*
for column wiring
installation.
Figure A
Securing the Column
Assembly of the 280G-F
(Continued)
Assembly, Operation & Parts Manual G-Range CV Pg
12
