6
Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call (866) 434-6067.
Set Up and Usage Instructions
Check Before Riding
1.
Loosen the stem tube clamp bolts with the 5mm hex wrench and push the stem tube onto the fork until it bottoms out onto
the fork headset lock nut.
2.
With the front wheel pointed straight forward, the handlebars should be square to the front wheel; tighten the stem tube
clamp bolts evenly and securely.
WARNING:
Failure to properly install and tighten the stem tube clamp bolts may cause the rider to lose control and fall. If you
do not understand these instructions or the concept of “tighten securely” seek the assistance of a qualified mechanic.
Clamp
Using the 5mm hex wrench, check the stem tube clamp bolts to ensure that they are tightened securely before riding.
Wheel and Bearings
Under normal circumstances and conditions Pulse Performance Products™ wheels and wheel bearings are maintenance
free. Nonetheless, it is the responsibility of the owner or guardian to periodically inspect the wheels for wear and tear, the axle
1.
2.
