4
Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call (866) 434-6067.
Before You Start
Remove all packing and items from the display box. Make sure that the power switch is
turned “OFF” before assembling the scooter.
WARNING:
DO NOT USE NON-PULSE PERFORMANCE PRODUCTS™ PRODUCTS WITH YOUR
Altering of the original components
may or may not be compatible with the design and will void the warranty.
• Allow up to 25 minutes for assembly, not including initial charge time.
• Allow up to 12 hours for the initial charge (see page 6 for charging information).
Estimated Assembly Time
Required Tools
10 mm / 8 mm
wrench
(included)
two [2] 13 mm
wrenches
(not included)
3 mm hex wrench
5 mm hex wrench
(included)
second
5 mm hex wrench
(not included)
phillips
screw driver
(not included)
battery charger
(included)
thumb switch throttle
brake
NOTE: This scooter does not have a
manual reset button or fuse. It is
integrated into the controller and is
self-resetting.
(not included)
WARNING:
charging port
