background image

DIB

-

2A

DIB

-

2A

FEATURE

OPERATINGDETERMINATIONS

DUAL ACTIVE DIRECT BOX

Thank you for having chosen an pulse DIB-2A,before you initial start-up,please make sure that there art no transpor:damages.Shoud there be any,do 
not take the device into operation and imnediately consult your dealer.

1

Converts 50K Ohms instrument-input into balanced mixer-outputs.

.    

2.    Power supply via 9V battery.
3.    Ground-lift switch.
4.    Switchable signal level+20/0/-30dB
5.    2 low-impedance XLR outputs.
6.    Mono-model: the signal is splitted from input 1 on both outputs.
7.    Phase-switch.
8.    Hi Cut-switch(8kHz).
9.    Modem convex housing design.
10.  Full-rubber-housing comers for safe operation.
11.  Cables can be routed under the housing

1

This device is a DI-box transmitting audio signals. This product is only allowed to be operated with 1 standard 9V battery  and was designed for 

indoor use only.

2

Batteries are hazardous waste which need to be disposed of appropriately. If the device is to be disposed. the battery  has to be removed first.

3

Make sure that the poles are correct when inserting the battery.be disposed. the battery has to be removed first.

4

Never  let  batteries  lying  around  openly  as  there  in  the  danger  that  these  can  be  swallowed  by  children  or  domestic  animals.Immediately 
consult a doctor when batteries are swallowed.

5

Leaking or damaged batteries can cause irritations when getting into contact with the skin. In this case use appropriate  protective gloves.

6

Make sure that the battery cannot be short-circuited, thrown into the fire and be charged. There is a danger of explosion.

7.   Never spill any liquids on the device. Should any liquid enter the device nevertheless, remove the battery immediately.  Please let the device 

be checked by a qualified service technician before your operate it again. Any damages caused by  liquids having entered the device art not 
subject to warranty!

8.   Do not shake the device. A void brute force when operating the device.
9.   The ambient temperature mist always be between-5 C and -45 C. Keep away from direct insulation (particularly in cars)   and heaters.
10. The relative humidity must not exceed 50% with an ambient temperature of 45C.
11. This device must only be operated in an altitude between -20 and 2000m over NN.
12. Do not permit operation by persons not qualified for operating the device. Most damages are the result of unprofessional operation!
13. Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
14. Please use the original packaging if the device is to be transported.
15. Please consider that unauthorized modifications on the device are forbidden due to safety  reasons!
16. If this device will be operated in any way different to the one described in this manual, the product may suffer damages  and the guarantee 

becomes void.

DIB-2A

Dual Active Direct Box

Reviews: