6
CONNECT AND OPERATE
1.
Connect an HDMI source to the HDMI
input
2.
Connect an eARC/ARC enabled HDMI
display to HDMI Output 1
3.
Connect a soundbar, A/V receiver
(AVR), external amplifier, etc. to
HDMI Output 2 (Audio only)
4.
Select the EDID to be copied from
Output 1 or Output 2
5.
Connect the included USB power
cable and adapter
a. At this point check for correct
video and audio formats on the display
b. Check the audio extraction to
ensure they are outputting the desired
format
NOTE: CEC and eARC/ARC needs to be
available enabled for the product to work
correctly. Reference the instructions/user
manual of the HDMI display to enable
eARC/ARC.
SAFETY AND NOTICE
The PA-EARCX has been tested for conformance to safety regulations and
requirements, and has been certified for international use. However, like all electronic
equipment, the PA-EARCX should be used with care. Please read and follow the safety
instructions to protect yourself from possible injury and to minimize the risk of damage
to the unit.
•
Follow all instructions and warnings marked on this unit
•
Do not attempt to service this unit yourself, except where explained in this manual
•
Provide proper ventilation and air circulation and do not use near water
•
Keep objects that might damage the device and assure that the placement of this
unit is on a stable surface
•
Use only the power adapter and power cords and connection cables designed for
this unit
•
Do not use liquid or aerosol cleaners to clean this unit
•
Always unplug the power to the device before cleaning
Amplifier
TV with ARC
Function
Source
