background image

4 of 15

www.pumpeng.com.au

Vision & History

PumpEng stock an extensive range of spare parts. The entire range of PumpEng 
submersible pumps is available for hire Australia wide on short and long term contracts.

A range of service programs are available, and can be tailored to your requirements. 

To ensure you never pay too much for our services, we offer a price guarantee on our product 
range. This effectively caps your maximum repair price. Simply send us your old pump if 
it goes over our limit and we will supply you with a PumpEng manufactured replacement.

•  
•  

• 

Our vision is to be the specialist in tough submersible dewatering pumps based on: 

Innovative thinking: To offer solutions to customer needs.

 
Product availability: Products available on time every time.

Technically sound product & system advice: Supplying the correct product 
every time.

After sales support: Providing support to our customers after the initial sale.

Our goals are:

     Develop & manufacture our own product range to give us product security and introduce 

these products into the market place with respect to our core values.

Develop brand name & product recognition of our products to ensure future growth,
security & profit.

PumpEng is an Australian company founded in 2001 that specialises in submersible pumps 
for use in mining, construction and industrial dewatering. Founder Paul Meneghel has 
experience in submersible pumps and mining stretching back to the 1980s. We are now a 
well established specialist submersible pump supplier to a wide range of customers across 
Australia, and are addressing global opportunities.

We have developed a team of experienced staff enabling us to satisfy our customers needs which 
vary from the design, manufacture and supply of our pumps to the expedient repair/ rebuild & full 
aftermarket support of our product range. The skills of our staff are further enhanced through the 
alignment of PumpEng with major foundries and engineering facilities located within Australia as well 
as abroad.

PumpEng’s philosophy is to provide exceptional product and follow on with first-rate sales service and 
support. We aim to provide a Total Dewatering Solution.

Parts, Hire & Service - A Full Service Provider

Summary of Contents for Raptor 5kw



















Reviews: