background image

Press on the ‘ON

/OFF

’ button, the inflation starts as well as the lamp starts.

 

Once the pressure is reached, the device stops automatically. 

Press on the ‘ON/OFF’ button again to disconnect the device.

 

MANOMETER 

Connect the flexible to 

the tire, press the ‘unités’ button. The pressure indicated is the actual one.

 

LAMP 

Press ‘ON/OFF’ button without pressing the ‘unités’ button, the lamp will start.

 

 

Charging: 

Check that the mini-compressor si well charged before using it. 
The full charge is reached in 2 hours. 
The LCD display will show you the battery charge level. 
A red LED will indicate the charge is on, it will turn to green when fully charged.

 

 
Precautions for use:

 

- Check that the device is not damaged before each use. 
In case the mini-compressor is damaged: electrical wires, body of the product, 

flexible. It can’t

 be 

used, it has to be discarded, recycled. 
- Equipped with a Lithium battery, you must charge the device at least 3 times a year. 
- Do not leave the device unattended plugged into a socket. 
- Do not place the compressor on or near direct heat sources and do not expose it to direct sunlight. 
- Do not bend or block the hose while the compressor is running. 
- The hose is adapted to the maximum allowable pressure. 
- Exclusively use the adapters provided with the mini-compressor. 
- This device is not waterproof, do not immerse it. 
- Always store the device in a cool and dry place. 
- The device was not manufactured for professional. 
- Do not use the compressor in or near a flammable and / or explosive environment. 
- This compressor should not be used continuously. Using the compressor over an extended period 
may cause overheating. It is preferable to not use it for longer than 12 minutes without interruption. 
After 12 minutes, turn it off and let it cool down for at least 12 minutes before using it again. 
- The compressor does not contain any parts can be serviced or replaced by the user. 
- Keep away from children. 
- Never disassemble or attempt to replace parts. In case of problems, bring the device to a qualified 
service technician or discard/recycle it. 

Warning for vehicles tires:

 

Only inflate your tires at the pressure recommended by the vehicle manufacturer. These 
recommendations can be found in the manual, or in

side the driver’s door 

for cars, or on the fuel hatch. 

Or on the wheels or close to it. 

In case of breakdown - Repair

 

In case of a fall, make the device checked by a qualified technician, or discard it / recycle it. 
 
 

CE CONFORMITY DECLARATION 

PROAKCESS sprl as importer 

5, rue de l’innovation

 

7503 Froyennes 
Belgium 
Represented by Michael Dumortier, authorized to manage the technical report. 
Declare that the new machine: 

Reviews: