11
Menu language selection at first power on
During the very first handset power on, the list of selectable languages is
shown automatically on the display. Please select your language and press
the
D
button to confirm. Later you can change the current language at
any time, as explained below.
Change the menu language:
The Punkt. handset (DP 01/
DP 01S
) supports the following menu
languages: English, English (USA), French, German, Italian, Spanish,
Danish, Swedish, Finnish, Norwegian, Dutch.
–
Press
F
B
, select ‘Handset settings’ and press
D
.
–
Select ‘Language’ and press
D
.
–
Select required language.
–
Press
D
to confirm.
Make a phone call:
–
Enter the number using the keypad (to call a contact stored in the
phone book, refer to the “Phone book” section of this Guide).
–
Press
D
to start the call.
–
Press
E
to end the call.
Set time/date:
Time and date settings are stored in the Punkt. base station. For this
reason, if the power cable is disconnected and then reconnected, the
previously set time and date will be cleared and the display will show
default values: 00:00 Friday 1st Jan. In this case, you should reconfigure
the time and date settings, or wait for an incoming call with time and date
information provided by your telephone operator. Normally, if you can see
the CLI (calling number) on an incoming call then you can also obtain time
and date settings automatically from the telephone network. Otherwise
this will not be possible. Please contact your telephone operator for more
information.
–
Press
F
B
, select ‘Time/date’ and press
D
.
–
Enter the time.
–
Enter the date.
–
Select ‘Done‘ and press
D
to confirm.
Change the ringtone melody:
–
Press
F
, select ‘Sounds’ and press
D
.
–
Select ‘Ring tone’ and press
D
.
–
Press
F
B
to select your favorite sound.
–
Press
D
to confirm.
Basic use of the phone
(initial settings)
