13
In call options
Hands-free mode:
–
When in call, press
D
on the “Hands-free” option to toggle On/Off.
Mute:
–
When in call, press
F
and select
D
on the “Mute” option to toggle
Mute On/Off.
Note: When the mute option is “On”, the other party will not hear your
voice.
Volume control:
–
When in call, press
F
and select ‘Volume’.
–
Press
D
.
–
Press
F
B
to adjust the volume.
–
Press
D
or wait 2 seconds to return to the in call menu.
Call Transfer:
Refer to the “Internal calls” section in this Guide for further details.
Flash (“R button” service activation):
Note: If you are in France and are connected to the French public
analogue line (PSTN network), before using the Flash button you
should set the “Flash time” parameter to 270 ms, as explained in the
“Base settings” section of this Guide.
During a conversation, the “Flash” option is used normally to access special
services (also known as “supplementary services”) if supported by your
telephone operator, such as the “Call waiting” service, “3-way conference”,
etc. Please check with your telephone operator for availability and
activation of the above services on your phone line.
In order to use the “Flash” option during an external conversation:
–
Press
B
.
–
Select ‘Flash’ and press
D
. “R” will appear on the display.
–
Dial additional digits, according to the instructions provided by your
telephone operator (for example, in Italy you can dial “R2” to switch
between 2 external connected calls and then dial “R3” to activate the
3-way conference service).
