13
EN
OPERATION
CONTROL PANEL
Button Press
Flame Level
Display Value
Fireplace
Appearance
1st Press
High
L3
Highest flame,
logs glow
2nd Press
Medium
L2
Medium flame,
logs glow
3rd Press
Low
L1
Low flame, logs
glow
4th Press
OFF
None
OFF
Main switch
The main switch is located on the back of the unit.
NOTE: Before using the fireplace please make sure set the main switch to the position I.
Set the main switch to the position O to turn off the unit.
Control Panel
The control panel is located on the top right corner of the unit.
Power ON / OFF
Press the power button to turn on the unit. Press again to turn off the unit.
NOTE: There is a thermostat limiter inside the unit. When the inner temperature is too hot, the unit will
automatically turn off to avoid damage to the product or risk of fire.
CAUTION! WARNING: DO NOT unplug the unit when it is still “ON”
Flame
Press the flame button to rotate and set flame effect levels.
NOTE: When the heater is turned on, the flame effect level can only rotate and set between High, Medium,
and Low.
1. Main switch
2. Display
3. Function Indicators
4. Flame
5. Timer
6. Power
7. Heat
1
6
7
4
5
2
3
REMOTE CONTROL
1. Power
2. Timer
3. Flame
4. Heat
5. Week timer
6 - 7. Week timer
adju -
1
2
3
4
5
6
7