background image

8

Item #308798

pureessentialoilworks.com • 800.520.6000

tng worldwide • New Hudson, MI 48165

©2018 TNG • Made in China

Problem Solution

Unit has stopped working. 

No or low water. Unplug unit and refill tank.

Water is accumulating 

Saturation of humidity. Lower mist control setting.

outside of unit or area 

surrounding unit. 

Unit not level and water is accumulating. Unplug and

 

place on level surface.

 

 

Point spray away from objects. Raise unit on a water- 

 

resistant level surface 2-3 feet off of floor.

Water dripping when 

Water remaining on bottom of tank. Wipe tank or tilt to 

refilling. 

drain before transporting.

Increased noise level. 

Unit must be placed on a flat, level, hard surface. Make sure

 

it is NOT place on a soft or absorbent surface.

Red light on power dial. 

Indicates low water. Unplug and refill tank.

Warranty

Pure Air Essentials Works offers a 2-year warranty for defects only. Not responsible for 

unit due to tampering, negligence, dropping, outdoor use or operating near water. If 

you experience any issues with the COOL MIST Luxury Ultrasonic Humidifier, please 

contact us at 800-520-6000. Do not contact or return to the retailer that you purchased 

from. In case of warranty replacement, please have your proof of purchase available.  

Product Registration

To ensure your full warranty and to receive product updates and streamlined customer 

support, remember to register your product at: 

www.pureessentialoilworks.com/registration.

Summary of Contents for COOL MIST









Reviews: