Usage and Maintenance Instructions
Ver. 1 09/2013 (2690)
3
INSTRUCTIONS FOR USE
1.
The appliance must always be operated with water.
2.
Check that the rotary switch is in OFF or “0” position before you connect the appliance to the mains.
3.
Do not connect or disconnect the appliance to/from the mains while your feet are in the water or if your
hands are wet.
4.
Place the appliance on a flat and suitable surface and the non-skid rubber feet will prevent it from slipping.
5.
Fill the appliance with warm water (at desired temperature).
6.
Do not fill water over the “MAX” water-level line marked on the unit. This unit is designed to maintain the
water temperature at a comfortable level, but not for raising the temperature.
7.
Seat yourself comfortably, place feet on the foot rests and select your desired setting, as below:
7.1
MASSAGE:
Turn the rotary switch to
[M
] (Fig. 2).
This function will give you a unique vibration massage.
7.2
BUBBLE:
Turn the rotary switch to
[W+ B]
(Fig. 3).
This function will give you a relaxing foot bath in warm water with stimulatory bubble bath.
7.3
MASSAGE:
Turn the rotary switch to
[W+ B + M ]
(Fig. 4).
This function will give you a unique vibration massage and a relaxing foot bath in Warm water with
stimulatory bubble bath.
8.
When you have finished your foot spa treatment, make sure you turn the rotary switch to the “OFF” or “0”
position, then unplug the unit.
9.
To empty, tilt the unit over a sink or bath to enable the water to flow out. Rinse out and dry the unit. Never
immerse entire unit in water or any other liquid.
PARTS AND ACCESSORIES
1
Cover
2
Air Nozzles
3
Stimulus nodes
4
Stimulus nodes
5
Rotary switch
6
Rubber feet
7
Spout
Fig. 1
Massage (M)
Bubble (W+B)
Massage (W+B+M)
Fig. 2
Fig. 3
Fig. 4
CLEANING
This unit is for household purposes only. This is a body care unit, not a washing basin. Clean your feet before using the
appliance and clean the appliance after each use. Deposit of dirt can clog the air jets and might undermine the bubble
effect.
1.
After usage disconnect the unit from the mains.
2.
Simply rinse it out with water.
3.
If you wish, you can wipe off all surfaces with a cloth damped with water and a mild detergent, then rinse
and dry.
