Usage and Maintenance Instructions
Ver. 1 09/2013 (2690)
3
Handle the cord carefully for long life, and avoid jerking, twisting or straining especially at plug
connections.
INSTRUCTIONS FOR USE
1.
The appliance must always be operated with water.
2.
Check that the switch is in OFF or
“0” position before you connect the appliance to the mains.
3.
Do not connect or disconnect the appliance to/from the mains while your feet are in the water or if
your hands are wet.
4.
Place the appliance on a flat and suitable surface and the non-skid rubber feet will prevent it from
slipping.
5.
Fill the appliance with warm water (at desired temperature).
6.
Do not fill water over the
“MAX” water-level line marked on the unit. This unit is designed to maintain
the water temperature at a comfortable level, but not for raising the temperature.
7.
Seat yourself comfortably, place feet on the foot rests and turn unit on using the on/off switch.
8.
When you have finished your foot spa treatment, make sure you turn the
switch to the “OFF” or “0”
position, then unplug the unit.
9.
To empty, tilt the unit over a sink or bath to enable the water to flow out. Rinse out and dry the unit.
Never immerse entire unit in water or any other liquid.
PARTS AND ACCESSORIES
1
Cover
2
On/Off Switch
3
Air Nozzles
4
Stimulus nodes
5
Rubber feet
Fig. 1
Massage
