STEP 3: ASSEMBLE SEAT AND MONITOR
Locate Seat Cushion (17), Seat Post (39), Seat Adjustment Knob (16), and the Monitor (14).
A.
Remove the Hex Nuts and Washers from underneath the Seat Cushion (17). Guide the exposed
bolts on the Seat Cushion underside through the 3 holes in the Seat Post (39). Place a washer
against the plate on the Seat Post and secure with the Hex Nuts.
B.
Place the assembled Seat Cushion/Seat Post into the rectangular hole in the top on the unit.
Carefully lower this assembly and secure with the Seat Adjustment Knob (16). Be sure to watch for
pinch points in case the seat suddenly drops. Before continuing, make sure that this assembly is se-
cure, and the knob is extended through one of the holes in the post.
C.
Connect the Sensor Wire extending from the front of the bike to the short wire which extends from
the back of the Monitor (14). Once this connection is secure, slide the Monitor onto the short metal
tab in between the Handles until it locks into place. Make sure that the wires are not contacting any
moving parts, and ensure that this wire is kept away from the Fan Wheel and the Handle assembly.
Meijer.com