ASSEMBLY INSTRUCTIONS
Step 4.
Attach the Handle Bars and Bike Pedals.
Affix the Handle Bars (5) to the Bike Main Frame (1)
using 2x Bolt M8x35, 2x Spring Washers (42), and 2x
Arc Washers (39). Make sure that the Spring wash-
ers are closest to the Bolt head, and the Arc Washers
are contacting the Handle Bar frame.
Next, attach the Pedals (56L & 56R) to the Bike Main
Frame. Make sure to install the Pedal marked (L) on
the Left side of the Bike and the Pedal marked (R) on
the Right side of the Bike as if you were sitting on the
seat.
Step 5.
Attach the Monitor to the Handle Bars.
Affix the Monitor (62) to the Handle Bars (5). Ensure
the Monitor Wire is protruding from the gap at the rear
of the Main Frame (1), and then connect the Upper
Monitor Wire. Plug the Pulse Wire into the hole at the
rear of the Monitor.
Folding and Unfolding Instructions:
When folding your X-bike for Storage, remove the
Lock Pin (13) as shown, and fold the bike for storage.
NEVER
unfold or operate the X-bike without securely
fastening the Lock Pin to the frame. Failure to do so
may result in injury and/or damage to the product, for
which Pure Global Brands is not liable.
Whenever opening your X-bike from the storage
position, always fully and securely insert the Lock Pin
(13).
