PURE 9040MTH, Product Manual

6

 CustomerService

@

GQBrands.com

GQBrands.com

1-866-498-5269

STEP 2

:

Parts:

8x T-Section Pieces (Part 5) 

4x 40mm Square Neck Bolts (Part 7) 

4x Nuts (Part 9) 

4x U-Shaped Bracket (Part 15) 

Locate the (A) openings in the frame 

(Shown in Page 5) to begin installing the 

T-Sections Pieces into the Frame.

A. Place a T-Section Piece on the outside 

of the frame and the other half from the 

inside of the Frame. Make sure that the 

T-Sections are facing up to install the 

legs in 

Step 6

. 

Insert a U-Shaped Bracket (15) to both 

T-Sections from the bottom. 

NOTE: 

The square opening of the 

U-Shaped Bracket must face the outside 

of the frame, and the round opening of 

the bracket must face the inside of the 

frame, facing the mat.

B. Insert a Bolt (Part 7) from the outside of 

the frame to show the smooth surface 

between both T-Section Pieces. Secure 

with a Nut (Part 9). Tighten loosely. 

NOTE:

Make sure Bolt is fully inserted and the 

Nut is not fully tightened. This will help 

inserting the Legs in 

Step 6

.

C. Continue to install all T-Sections in the 

remainder of the

 (A)

 openings of the 

frame.

ASSEMBLY INSTRUCTIONS

(5)

(5)

(7)

(9)

(15)

Tighten 

Loosely

Square 

Opening

Round 

Opening