12
Help and specifications
Secondary and inactive stations
(<</>>) Secondary DAB services
Secondary services accompany some stations, providing extra information or alternative content
and may only be broadcast at certain times. If a station has secondary services available, the
station shows ‘>>’ next to its name in the station list and the secondary service appears next to the
station in the list. A secondary service has a ‘<<’ before its name in the station list.
(?) Inactive or unavailable DAB stations
Inactive or unavailable stations appear on the station list preceded by ‘?’ and cannot be tuned to.
A station may be inactive or unavailable because the station is not broadcasting at the current time
(check with the station) or has stopped broadcasting altogether. Also, you may not have a strong
enough signal to receive the Multiplex on which the station is broadcast.
Troubleshooting
Display says ‘ No stations available’
Use Autotune (page 10) to search for stations. Try adjusting your aerial or radio position.
Receiving new DAB stations that have started broadcasting
The number of DAB stations you can receive may increase as new national and local DAB stations
are launched. Use Autotune (page 10) to scan for new stations and add any new stations found.
Resetting your radio
Resetting your radio removes all presets and stored stations and resets all options to defaults. To
reset:
1. Press and hold the
Menu
button for three seconds.
2. Press the
Select
button within 3 seconds to confirm the reset or the reset will cancel.
Technical Specifications
Specifications:
Digital radio with full Band III, L-Band and FM reception. ETS 300 401
compliant and capable of decoding all DAB transmission modes 1-4 up to
and including 256 kbps. Future upgrade supported for DAB+.
Frequency ranges:
DAB Band III 174–240 MHz, DAB L-Band 1452-1491 MHz and FM 87.5–108 MHz
Speaker:
Full-range 2.5” drive unit. 1.7W RMS amplifier. Active speaker equalization filter.
Input connectors:
5.5V DC power adaptor socket (230V supplied). Mini USB connector for
product upgrades.
Output connectors:
3.5mm stereo output for headphones.
LCD display:
LCD display with 16 x 2 characters. Features auto-dimming backlight.
Mains power supply: 230V AC to 5.5V DC external power adapter.
Power consumption:
0.99W in standby (industry average 5.72W); 2.02W in operation (industry
average
7.21W).
Approvals:
CE marked. Compliant with the EMC and Low Voltage Directives (89/336/EEC
and 73/23/EEC).
Dimensions (mm):
190 wide x 170 deep x 60 high.
Aerial:
Attached wire aerial.
Secondary and inactive stations > Troubleshooting > Resetting > Technical Specifi cations
Components are selected to
minimise environmental impact
