06
07
PureAiro
WMDH 25
MAINTENANCE
220 Volts AC may cause serious injury from electric shock. Be sure the
unit is powered off and unplugged or circuit breaker is turned off before
removing front cover to service unit.
WARNING
Cleaning Front Cover
Filter Maintenance
Use a soft damp cloth to clean the front cover as required. Do not use any soap or solvents.
Check the filter on a regular basis (will vary based on application). Clean or replace, as
necessary.
NOTE:
Machine is intended to
opcrate with all components
shown.Do not remove any parts
including Styrofoam fan shroud.
To Remove Filter
Remove screws in the front cover.
Push the front cover up gently to free the cover hooks from the chassis.
The filter is located on the back side of the front cover.
1
2
3
To Clean Filter
Filter can be vacuumed with a wet/dry vac or washed with warm water.
To Install Filter
Insert filter in tabs on top of mount
Flex filter to insert under bottom taps
Once filter is in place, re-install front cover:
a. Line up cover with tabs
b. Slide down into place
c. Secure with tamper proof screws
1
2
3
Coil Maintenance
Once per year, clean the coils with an approved coil cleaner
Coil cleaner should be a self rinsing, foaming cleaner such as WEBR Coil Cleaner.
