02
03
01
04
02
01
Close
01 Pull out the tray and disassemble.
02 Pull out tray cover and disassemble.
03 Throw away water and clean the tray by soft cloth.
04 Assemble the tray and tray cover by opposite way of above.
01 Close the Feed water valve.
02 Use neutral detergent to clean the body and Use a soft & dry cloth to clean lastly.
15
How to clean Water purifier body
How to clean water tray
14
How to use
정수
Water
Close
수소
Hydrogen
Water
Turn the lever to clockwise to extract
ambient water (Green LED)
Turn the lever to middle side to
stop extraction (Blue LED)
Turn the lever to counterclockwise to
extract hydrogen water (Red LED)
※
*Power Saving Mode : If the product is not used for 10 minutes, Power saving mode turns on.
- LED turns off
- Filter Alarm still turns on while Power saving mode.
- When Extracting, Power saving mode turns off autometically.
When extracting hydrogen water for
the first time, the prep action is
executed for around 5 seconds.
(Red LED blinks.)
Hydrogen Water can be extracted for
5 minutes consecutively.
After 5 minutes' consecutive extraction,
the hydrogen water extraction will be
deactivated for 10 minutes for the
stable performance.
!
