background image

2

 [

EN

]

1.

SECURITY INFORMATIONS

CAUTION

This dehumidifier should not be used in areas where are:

There are explosives

  - Hostile atmosphere

  - With high concentration of solvents

- Extremely high dust ratio

Keep away from children: Do not let children play with or around this unit, which could lead to injury. Be sure the 

unit is inaccessible to children.

Hold Unit Grounded : Always connect the appliance to a grounded socket. A grounded plug is an essential safety 

feature that helps reduce the risk of electric shock or fire.

Protect the power cord from DANGER: Never use a unit with a damaged power cord as this may cause electric shock 

or fire. If the power cord is damaged, it must be replaced with a cable of the same type and rated voltage.

Cable Extension: The walkways must be grounded and able to power the unit without any problems.

Handle with Care:

  Do not drop,  throw  or crash the dehumidifier.  Rough treatment can damage the components or 

wiring and create a hazardous condition. 

Fixing on a stable surface: Always use the unit on a firm, flat surface, for example, the floor or a strong base, so 

that the dehumidifier can not fall and cause injury.

Keep it away from water

:

 

Never use the appliance near standing water, as this may create a risk of injury from electric 

shock. Do not store or use it outdoors. If the electrical wiring or accessories are wet, dry thoroughly before using the 

appliance. If any doubt, do not use the dehumidifier and consult a qualified electrician or contact 2521103265 to speak 

with an approved engineer.

Keep the air inlets Clean: Do not block or prevent the air intakes by placing the dehumidifier very close to 

curtains and walls. This may cause the unit to overheat and cause a fire or electric shock hazard.

Kepp  the  air  filter  clean

:

 

Always  use  a  clean  air  filter.  Do  not  allow  any  material  to  clog  it,  as  this  may  cause 

overheating in the dehumidifier. Never use it without a filter. Always check and, if necessary, clean the filter before 

moving the dehumidifier to the work area. Do not allow oil, grease or other contaminants to come in contact with the 

dehumidifier.

Keep electrical equipment dry: Never leave water in electrical components of the dehumidifier. If these areas are wet 

for any reason, dry them well before using the dehumidifier. In case of doubt, do not use the dehumidifier and consult a 

qualified electrician or call 2521103265 at day4energy.gr to speak with an approved engineer.

You should make sure that the user knows the operating instructions of the machine.

 

Wiring instructions: If it is necessary to change the plug, please note the power cables. They are 

colored according to the following code:

Summary of Contents for DESIGN SERIES PD 130LA























Reviews: