16
Set timer off of the machine
12) Ionizer
Turn on/off the ionizer
13) Link
Link to Puredry web page
There are two ways to remove collected water
1)
Using the water bucket
When the water tank is full the alarm will beep and the full indicator symbol will
turn on then you must slowly remove the bucket.
• Carefully remove the water tank and safely empty the water. Do not attempt
to place the container on the ground, as the bottom is uneven and there is a risk
of water spilling.
• Clean the container with clean water if necessary. Do not use solvents or hot
water.
• When removing the container, clean the inside carefully without touching the
components as this may cause damage.
• After draining the water, replace the container with the appliance. Make sure
the container is in the correct position and the float is in the correct position.
• Do not drink the water you collect and do not use it for other activities.
• When the water tank is repositioned in the correct position, the dehumidifier
will start working again.
2) Continuous draining
