7
1)
Do not block or restrict the airflow
around the unit. Make sure the air
inlet exhaust grills are not
obstructed. Allow 20 cm of
clearance around the unit.
2) Ensure the air filter clean
3) When using the HEPA-CARBON filter,
you have to set the fan speed to HIGH.
Also note that the efficiency of the
dehumidifier will be reduced by 30%
4) The HEPA-CARBON filter is compliant
with the international standards so that it
Retains 99,997% of all particles with size
From 0,1μm or larger. Stops mold spores,
dust, dead cells from pets mites etc…
5) Before the initial operation,
please check, if water level switch,
located within the water bucket
area, is in the right position
.