PureFlow AirDog®
AirDog® II-5G DF-165
2011-2016 6.7L Powerstroke
Section 2
Installation and Safety Guidelines
6
AirDog
®
II-5G MODEL DF-165
INSTALLATION GUIDELINES
The installation of your AirDog
®
II-5G can be relatively easy by following the steps outlined in
this manual, and:
1.
Inventory the package components completely. Notify PUREFLOW AIRDOG immediately of
any missing or damaged parts. (877-421-3187)
2.
Read the installation manual completely. Understand how the system operates and take
note of installation recommendations before beginning installation.
3.
The installation recommendations contained herein are suggested installation guidelines
only. Individual installations may vary.
4.
When installing the AirDog®II-5G fuel lines, be sure to connect the ORIGINAL ENGINE
RETURN LINE to the fuel tank as it was from the factory when the installation is complete!
If any installation procedure is uncertain, contact
PUREFLOW
AIRDOG for technical assistance.
SAFETY GUIDELINES!
CAUTION!
Be sure to chock the vehicle’s tires to prevent rolling.
CAUTION!
Use proper supports when working beneath an elevated vehicle.
CAUTION!
Most diesel pickups have two (2) 12volt batteries. Disconnect the battery
cables to both batteries before proceeding with the AirDog
®
II-5G installation.
CAUTION!
Vehicle frame rails should not be drilled into or welded upon.
CAUTION!
Wear safety glasses when operating power tools such as drills and grinders or
when using a punch or chisel.
CAUTION!
Use common sense when routing fuel lines and electrical harnesses. Keep them
away from hot exhaust components and/or moving parts. Properly secure lines
to prevent chaffing.
NOTE: The pictures used in this manual are for example only and may not be exactly the same
as your truck.
