PureFlow AirDog®
AirDog® II DF-100, DF-165, & DF-200 2001-2010 Duramax Diesel
Section 4 (Continued) Fittings, Brackets, and Mounting
10
4-3.
Assemble the AirDog mounting bracket (001-3C-0004) to the frame bracket (010-3C-
0001) using the spacer (010-3C-0003-A-P) as shown in figure 5 using the four bolts, lock
washers, and nuts included in the mounting bracket hardware kit (figure 6). Properly
torque all fasteners! You will need a 3/16” allen and a 1/2" wrench. The bracket
assembly should look like figure 7.
4-4.
Attach the AirDog®II-4G to the frame bracket assembly as shown in figure 8 using the
supplied hardware in the mounting bracket hardware kit.
NOTE:
We recommend installing the AirDog® on the inside of the frame rail, but we understand
some applications just don’t have the room. The photos in this manual may not be the same as
your application.
4-5.
Be sure to tuck the AirDog®II-4G as far up as possible without it rubbing on anything to
prevent damage from road debris. The braket assembly is adjustible to achieve this.
Figure 5
Figure 6
Figure 7
Figure 8
