PureFlow AirDog®
AirDog® II DF-100, DF-165, & DF-200 2001-2010 Duramax Diesel
Section 6A (Continued) Fuel Lines (Supply Line to Engine)
14
6A-3. Assemble one end of the hose (Reference section 5) using fuel line end FCQ12S and plug
it into the J2044 male connection on the factory fuel line to where the factory suction
line was just removed from behind the fuel cooler in the previous step. A “click” will be
heard once properly connected.
6A-4. Run the fuel line along the frame as mentioned in step 5-3 to the “Engine” port in the
AirDog
®
. Cut the fuel line to length and insert fuel line end FQC12S per step 5-1. Once
the connector is installed, connect it to the male J2044 fitting in the “Engine” port in the
AirDog
®
. A “click” will be heard once properly connected.
CAUTION:
Properly secure all fuel lines to prevent damage from chaffing and/or abrasion.
FQC12S
HS20
Figure 18
FQC12S
HS20
Figure 19
