Altec AIR
P8400W Air-dryer User’s Guide
Page 34 of 110
P017585 – Rev. A
8.5.9 Compressor Total Hour Alarm –
Occurs when the compressor has
reached an 8,000-hour maintenance
interval. Perform the next required
maintenance.
Press the Info (
) Button to see the
detail of the alarm.
See section 10.3 for maintenance information.
8.6 Accessing the Setup Menu
The P8400W has three (3) Setup sections:
System Setup
– Used to set
system parameters including
Cycle Mode, Cycle Time,
Startup Delay, Alarm Delay,
Date, Time, and Units. This menu also allows for firmware updates via
USB.
Alarm Setup
– Used to set the alarm thresholds for specific readings.
Once the threshold is reached (or exceeded) this results in an alarm. Each
of these thresholds is factory programmed with a default value. Many of
can be modified to levels based upon your specific application.
Network Setup
– Used to configure network settings including the IP
Address, Subnet Mask, Gateway Address, Monitoring System Number
and Keyword.
Summary of Contents for Altec AIR P8400W
Page 1: ...P017585 Rev A P8400W Air dryer User s Guide...
Page 2: ......
