Please note:
• Controlling this HomeKit-enabled accessory away from home requires
an Apple TV (3rd generation or later) with Apple TV software 7.0 or
later and an iPhone, iPad, or iPod touch with iOS 8.1 or later. PureSwitch
requires a WiFi connection. For indoor use only.
• Your PureSwitch
™
is also referred to as an accessory.
• A device refers to an iPhone,
®
iPad
®
or iPod touch.
®
• An appliance refers to the item you are connecting to the PureSwitch,
™
such as a lamp.
Before you get started:
• Make sure you’re using iOS 8.1 or later on your device.
• Turn on your devices’ Wi-Fi.
• Plug the PureSwitch
™
into an outlet, and then plug in the appliance
you want to control.
Quick Start Guide
1. Download the PureSwitch
™
app from the app store. When asked to
access your data, select ALLOW.
2. Open the PureSwitch
™
App. Press +ADD HOME to create your home.
3. Press + ADD ROOM. Enter the room name, such as “Office”.
4. To pair the PureSwitch
™
to your network, press + ADD ACCESSORY.
You’ll see “Browsing for new accessories,” then PureSwitch-XXXXXX
(your custom six-digit alpha-numeric code) will appear.
5. You’ll see Accessory Name PureSwitch-XXXXXX. You may assign room
or add room,once completed press ADD.
6. A prompt will ask you to add accessory to network, press allow.
7. Scan your pairing code or enter it manually as noted below.
Your Pairing Code is:
8. To control your appliance, press on the On/Off toggle button.
Note: If your appliance has an on/off switch, make sure the
switch is turned ON.
Resetting the PureSwitch
If any of the steps above do not work, follow steps 1 and 2 below:
1. Press and hold down the small, round button on the bottom of the
PureSwitch for 15 seconds until the LED light switches off, then back
on again. Please wait until you hear a click.
2. Restart your iPhone,
®
iPad
®
or iPod touch.
®
For Troubleshooting and information on Scenes, Zones and Rules,
please refer to the PureSwitch User Manual that can be found at
www.pure-gear.com/pureswitch/support
