7
Video Connection
Step 1: Ensure the digital video/audio source and display is turned off
Step 2: Connect the digital DVI-D Dual Link cable and fiber optic cable to ODC module
Step 3: Connect power adapter to the transmitter (TX/RX) module of ODC
Step 4: Connect power code to the power adapter and plug in to power outlet
Step 5: Turn on the display
Step 6: Turn on the source
EDID data saving
Step 1: Connect DVI Input port on ODC
TX
unit to display such monitor or HDTV
Step 2: Push EDID S/W for 3~4 seconds
Step 3: EDID LED is illuminated for about 1 second if EDID was saved correctly
If EDID was not saved correctly, EDID LED blinks 6 times. The default EDID when it is shipped is
QXGA 2650*1600.
EDID saving is to display the best resolution between the video source and the display
Connection of fiber optic cable
Connect fiber optic cables one to one according to the signs on ports.
