PureLink by Dtrovision
9
3.3 EDID Settings
1) Internal EDID setting
Turn ON switch 2. Select settings for switch 3, then press
SAVE to store internal EDID data.
2) Display EDID settings
Turn OFF switch 2, then press SAVE to reset the display
EDID data.
3.4 LED Signals
POWER : Indicates that the power is ON
VIDEO : Indicates video signal input
HDCP : Indicates the video signal’s HDCP compliance
EDID : The LED light will turn ON for 3-4 seconds, indicating that the EDID
settings have been successfully saved.
A blinking LED light indicates that the EDID settings have not been
successfully saved.
BITSTREAM : Indicates that BITSTREAM audio has been detected.)
MULTI CH : Indicates Multi CH Audio signal input
2CH : Indicates 2CH Stereo Audio signal input
DOWN MIX : Indicates when Multi CH Audio is down-mixed out correctly
