PureLink UX-4400 Owner'S Manual Download

Page: 2 / 41

PureLink by Dtrovision

ABLE OF

ONTENTS

Chapter 1. Product Overview

1.1 Safety Precautions --------------------------------------------------------------- 3
1.2 Declaration of Conformity --------------------------------------------------------------- 4
1.3

What’s in the Box --------------------------------------------------------------- 4

1.4 Product Introduction      ---------------------------------------------------------------    5
1.5 Front View of UX-8800    ---------------------------------------------------------------    6
1.6 Rear View of UX-8800    ---------------------------------------------------------------    6
1.7 Front View of UX-4400    ---------------------------------------------------------------    7
1.8 Rear View of UX-4400    ---------------------------------------------------------------    7
1.9 Installation Guidelines     ---------------------------------------------------------------    8

Chapter 2. Product features

2.1 Features --------------------------------------------------------------- 9

Chapter 3. Operational guidelines

3.1 Main Menu User Guide --------------------------------------------------------------- 10

Chapter 4. Communication Code Configuration

4.1

Control Programmer’s Guide ---------------------------------------------------- 15

4.2 Overview ---------------------------------------------------------------------- 15

4.3 Command Code Formats ----------------------------------------------------------- 15

4.4 General Rules for Command Codes --------------------------------------------- 16

4.5 Command Ack Value Response ---------------------------------------------------- 18

4.6 Connecting Switches --------------------------------------------------------------- 18

4.7 Disconnecting Switches ----------------------------------------------------------- 20

4.8 Connection Status Check ----------------------------------------------------------- 22

4.9 LAN Code Configuration ----------------------------------------------------------- 25

Chapter 5. Web UI Guide and Firmware Instruction

5.1 Web UI Guide ---------------------------------------------------------------- 26

5.2 Firmware upload Web UI ---------------------------------------------------------- 35

5.3 Firmware upload USB -------------------------------------------------------------- 38

*There are two ways to upload the firmware (Web UI, USB port)

Chapter 6. Additional Information

6.1

Manufacturer’s Warranty (3-Year) ------------------------------------------------- 41

6.2 Customer Service ------------------------------------------------------------------- 41

Summary of Contents for UX-4400










































Search results

Summary of Contents for UX-4400

Reviews:

Related manuals for UX-4400

Brands by name

Popular brands

PureLink UX-4400, Owner'S Manual

Search results

Summary of Contents for UX-4400

Reviews:

Related manuals for UX-4400

Brands by name

Popular brands