PureMate
TM
2
PM718
Thank you for purchasing the innovative PureMate PM 718 Cool Mist ultrasonic humidifier. We wish you many years of healthy indoor
air with this efficient and effective product.
Ensure that all safety precautions are followed when using this electrical appliance for the proper operation of the device. These
instructions describe the safety precautions to be observed during operation. They are designed to prevent injuries or damage to this
device.
SAFETY PRECAUTIONS
The inner ultrasonic transducer is highly sensitive. Do not touch it with bare fingers or scrape it with metal tools, or it will reduce mist
output. When cleaning this area please use a small cleaning brush, cotton swab or toothbrush. Do not use hot water as it may damage
the missing parts.
Use proper voltage AC 220~240V 50Hz in UK and Europe. Use of improper voltage may cause fire hazard or electric shock.
To prevent electric shock, do not dismantle, repair or modify this product. Maintenance and cleaning should be followed exactly as
instructed in this manual. In the event of a malfunction, please contact an authorized PureMate maintenance center.
Do not use in areas where flammable or explosive materials are stored.
Do not place this device in direct sunlight or near objects that generate high temperature heat. The heat may cause deformation or
warping of the outer casing. Do not operate the unit without water in the basin.
Do not insert foreign objects into the device. Do not touch the transducer or the lower water basin when the unit is operating. Do not
scratch the transducer. Do not touch the mist output when producing warm mist.
Do not submerge this device in water. Water or cleaning liquids may only be used on parts to be cleaned according to the cleaning and
maintenance instructions.
Only use lime scale remover or vinegar to clean mineral deposits from the basin or transducer. Do not use any harsh detergents that
may damage the unit.
If you smell an abnormal odour please turn off and unplug the unit and call PureMate technical support.
Do not use fabrics or other materials to cover this device. Obstructed air inlets and outlets will result in improper operation of this unit
and may result in fire or other damage.
Do not plug in or pull out the power cable with wet hands. Do not disassemble the base unit. Before cleaning and maintenance, the
appliance must be disconnected from the main supply. Do not touch water and components in the water basin when the unit is working.
Children should be supervised to ensure that they do not play with the appliance.
To prevent interference and damage to other electronic devices, this machine should be placed at least 1 meter away from a computer,
television, radio or other electronic equipment.
For safety reasons and to prevent fire or electric shock, unplug the power cord from the electric outlet socket whenever you:
o
Do not use the device for a long period of time.
o
Remove the tank, clean or service the machine or the permanent filter.
o
Move or transport the device.
If the power cord is damaged, then it must be replaced by a qualified person to prevent electric shock or fire.
