PRE-OPERATING INSTRUCTIONS
Before getting started, please remove the PM 908 from its box and allow it to become accustomed to the room temperature for at least
30 minutes especially if the machine is cold from the outside air. The PM 908 is designed to operate at temperatures between 5-40 ºC
and relative humidity of less than 80%.
Water Tank Filling
Get the water tank out of the machine, unscrew the lid and fill the tank with water, then screw the lid well. Put the water tank on the
machine body steadily.
NOTE:
Do not add water directly to water sink, always add water into water tank.
Buttons instruction
Switching on/off button:
You can switch the unit on and off by one pressing of the button.
Ion button:
You can switch the ionisation mode on and off by one pressing of the button «ION».
Timer button:
You can set the switch off time. To do this, consequently press or hold the button «TIMER». The timer is set in
the range from 1 to 12 hours with 1 hour step. Switch the timer off consequently press the button «TIMER» until
the symbol «- - H» appears on the display.
Min/max mist button:
Select mist release intensity by pressing consequently the button «MAX/MIN»:
«1» - low intensity, «2»- medium intensity, «3»- high intensity.
Min/max humidity button:
Set Humidity : Humidity can be increased from 45% to 75% at increments of 5% ( Machine checks
humidity automatically when it is turn on).
Constant humidity: The machine controls the humidity automatically when it is set for specific percentage
humidity. For example, If humidity is set at 50%, the machine will check the humidity around to see if it has
reached 50%, if it is less than 50%, machine keeps working, if it is equal to 50% or above, the machine stops
working to ensure the humidity is at a stable situation. Machine will start working again if humidity less than your
setting humidity.
Auto function:
The Auto Function means that the machine can work automatically. When you press the Auto button, the
machine will enter into the auto control mode. Under this function, the machine will choose a suitable humidifying
level( Normally High Setting ) according to the environment humidity and maintain the humidity between 60~65%,
it will work in small speed, and maintain the room humidify (60~65%) for people to stay healthy.
Low water level indication:
When the water tank becomes empty, the unit will be switched off, you will hear a sound signal, and the indicator
will light up red in the display.
Water tank illumination:
The illumination lights up when the unit is plugged in. The illumination allows to check the water level in the tank.
PUREMATE
4
PM 908 Digital Ultrasonic Humidifier
