14
HOW TO TEST THE PH / CHLORINE
1. Add 2 Drops of the PH / Chlorine testing solution to sample.
2. Compare the resultant hue to the ph inspection chart.
It will tell you the ph level.
3. The chlorine testing result should be yellow in your tap water,
the ionized water should colorless.
1. Keep away the testing kit from fire.
2. Testing kit or water with testing solution should
not drink or drop into eyes.
3. Keep the testing kit out of children's reach.
4. If drink accidentally, then drink lots of water and
go to the hospital immediately.
5. If drop it into eyes, then rinse with clean water
and go to the hospital immediately.
6.To enable JA303 start functioning, water flow
must not lower than 1.2 LPM.
7.Auto-flush begins every 12 hour of using.
System will go back to normal function after 30
seconds auto flushing. Please don't switch any
indicators lights during auto-flush.
