8.Take tubing white again, connect it with the drain out (as point 3 on page 07)
4.Get deliver valve and seal it with Teflon tape for 14 circles. Then connector it
with the feed water connector.
5.Get tubing white, connect it with deliver valve and the inlet water supply (as
point 1 on page 07)
PRO
P
URE
DRINKING WATER SYSTEM
PRO
P
URE
DRINKING WATER SYSTEM
7.Take tubing white, connect it to the deliver valve and the inlet water to storage
tank (as point 2 on page 07)
PURE-PRO
R
EVERSE
O
SMOSIS
SYSTEM
09
10
PURE-PRO
R
EVERSE
O
SMOSIS
SYSTEM
RO600 600GPD Light Commercial
RO600 600GPD Light Commercial
9.Use an electric drill and drill an approximately 1 cm hole through the
kitchenware table.
Installation diagram
Installation diagram
6.Screw in ball valve connector as shown in the picture.
Before jointing the tank ball valve, seal ball valve connector with Teflon tape.
Now put tank ball valve and its connector together.
Note: Teflon tape is required for every joint point.
