6.a.Unpack water storage tank. Take tank ball valve and deliver valve. Seal the
female jaco fitting as attached on the water tank with Teflon tape for 15 circles.
(picture 1). Take tank ball valve and tighten it up with the female jaco fitting.
b.Use Telfon tape again to seal the another deliver valve. (picture 2). Then
tighten it up with the tank ball valve.
8.Take tubing white again, connect it with the drain out (as point 3 on page 07)
4.Get deliver valve and seal it with Teflon tape for 14 circles. Then connector it
with the feed water connector.
5.Get tubing white, connect it with deliver valve and the inlet water supply (as
point 1 on page 07)
PRO
P
URE
DRINKING WATER SYSTEM
PRO
P
URE
DRINKING WATER SYSTEM
7.Take tubing white, connect it to the deliver valve and the inlet water to storage
tank (as point 2 on page 07)
PURE-PRO
R
EVERSE
O
SMOSIS
SYSTEM
09
10
PURE-PRO
R
EVERSE
O
SMOSIS
SYSTEM
RO800 800GPD Light Commercial
RO800 800GPD Light Commercial
9.Use an electric drill and drill an approximately 1 cm hole through the
kitchenware table.
Installation diagram
Installation diagram
