The meter has auto reading hold function to keep reading on LCD until
next measurement or power is off.
1.Remove the protective cover, and press the button. The LCD will
display "0000".
2.Dip the TDS tester into the sample. Stir gently to remove any air bubbles,
and wait for the reading to stabilize.
3.Remove the meter from water to obtain TDS reading.*
*Note: during stabilization the TDS movement should be minimal.
4.
5.To turn off the meter manually, press the button for approximately 3
seconds.
¨
arts
P
:
TDS Range: 0~2999 PPM
Resolution: 1 ppm
Accuracy: +-2%
Battery: single 3V button cell batty (included)
0
0
Operated temperature: 0 C~ 50 C
Dimensions: 150 x 27 x 16 mm
Weight with case: 40g
¨
Specifications:
¨
Operation Procedures:
Un-treated tap water
TDS rating: 200~350 PPM
Treated (purified water)
TDS rating: 1~39 PPM
¨
Install / Change Battery:
**Change batteries when the LCD display is not clear or becoming dim.
1.Remove the battery cover.
2.Install 3V button cell battery.
¨
Applications:
- Water Purification
- Reverse Osmosis
- Distillation
- De-Ionization
- Aquariums
- Pool & Spa Maintenance
- Photographic Labs
PurePrp TDS Meter
PurePrp TDS Meter
Top cap
Ideal for residential use.
Highly efficient and accurate due to its advanced microprocessor technology.
Auto reading hold function.
Auto-off function.
Measurement range: 0-2999 ppm.
Display: large and easy-to-read LCD screen.
Super power saving.
¨
Features:
Battery
Probe
ON / OFF
LCD display
Maximum
immersion
level
