7
HYBRID SERIES
| Filtration & Ultraviolet Disinfection All-in-One Unit
Application warning: minimum water characteristics must be met before
installation of Radfire™ to ensure proper operation and continuous protection.
• If stated water quality parameters are exceeded; pre-filtration is required as water
of this quality can compromise the effectiveness of the UV system. The filters
and the sleeve should be cleaned or replaced as required to keep them in good
condition.
• If bacteria has been present prior to the installation of this system, we recommend
flushing the pipelines with Puretec TankSafe.
• Never connect PVC pipe directly to the unit.
The outlet pipework within 1 metre
should be metal or polyethylene.
• The system should not be used for any other purpose without specific referral to
Puretec.
• Heating of water is an integral feature associated with UV systems and if this
is deemed a problem we recommend installing a temperature management
valve, which is installed inline immediately after the system and releases water
periodically. Ordering code is
RI-TMS4.
Note: This water filtering appliance should only be installed by a fully qualified &
licenced plumber.
Installation Note:
A water filter system/tap, like any product, has a limited life
and may eventually fail. Also sometimes failure happens early due to unforeseen
circumstances. To avoid possible property damage, this product should be regularly
examined for leakage and/or deterioration and replaced when necessary. A drain pan,
plumbed to an appropriate drain or outfitted with a leak detector, should be used in
those applications where any leakage could cause property damage, and/or the water
supply should be turned off if no one is home/present.
INSTALLATION SHOULD BE COMPLETED BY QUALIFIED TRADESPEOPLE.
FAULTY OPERATION DUE TO UNQUALIFIED PERSONS WILL RESULT IN VOIDED
WARRANTY COVERAGE.
Installation Requirements
Summary of Contents for HYBRID G12
Page 24: ......
