2 1 |
P a g e
SOLENOID CONNECTION MODULE:
Connects a
NORMALLY CLOSED line voltage solenoid valve to
the system. On a non-monitored system, the sole-
noid will only close on a lamp failure error. On a
monitored system, the solenoid is closed when the
UV level drops below 50%. Also note that in cases
where emergency use of untreated water is re-
quired, the controller can be placed into a manual
override mode allowing for the flow of water in an
alarm condition. Order PN
RI-SOL.
4-20 mA MODULE:
Outputs a 4-20mA signal of the
UV output to a remote device such as a data logger
or computer. Order PN
RI-MOD420.
ETHERNET MODULE:
Allows for all controller func-
tions to be connected to a computer via an Ether-
net cable.
