8
Installation & Operation Manual
Copyright © Puretec Ltd 2020
Battery Installation
Figure 2 - Battery Installation / LED Reminder Light
1. Remove the black battery seat from the
faucet lever handle (see Figure 3).
2. Install battery into the battery seat,
positive side up, discard plastic insert.
Note: Red light flashes
twice and then followed by
the blue light.
3. Reinstall battery seat
assembly into the faucet
lever, battery side facing
outwards.
Important note:
Battery must be replaced when
changing cartridges.
5. Red light flashes indicates your cartridges
are due to be changed (usage has exceeded
3,000 minutes or 12 months).
Please
change the battery when changing the
cartridges
.
Positive
side up.
Negative on the
PCB.
4. Blue light flashes during
normal operation.
Display
Battery Seat
Circuit Board
Battery
(CR2032)
Counter Top
Plastic Washer
Lock Washer
Locking Nut
Insert
1/4" Compression Nut
1/4" Tube
Olive
O-Ring
Escutcheon
Faucet
ø12.5 Hole
WARNING!
This product contains a battery.
Accidental ingestion may occur and can be
fatal. Please keep out of reach from infants.
If you suspect an accidental ingestion please
contact emergency services.
