Cleaning The Receiver Tubes & Domes
Changing wax guard for NP receiver tube
1. Clean any debris from the old wax guard.
2. Insert the wand into the old wax guard.
3. Twist the wand with the wax guard in a clockwise direction to ensure it
is attached to the wand.
4. Pull the wand and wax guard away from the tube/mould.
5. Insert the old wax guard into the center of the HF3 wheel.
6. Dispose of the old wax guard by drawing the wand to the narrow end
of the center disposal area.
7. Insert the empty wand into a new wax guard on the HF3 wheel.
8. Pull the new wax guard attached to the wand away from the HF3 wheel.
9. Insert the wand into the receiver tube/mould.
10. Twist the wand to release the new wax guard onto the receiver tube/
mould.
25