7
Getting Started
Installing the TV Streamer 2
Depending on your TV, Hi-Fi stereo, computer or other audio setup, the
installation of TV Streamer 2 may be done in several ways described in the
following section. The following steps will guide you through the pairing and
connecting process, which can be easily accomplished by almost anyone.
Start by connecting cables between the TV Streamer 2 and the audio
source and finish by pairing the TV Streamer 2 to your hearing instruments.
Connecting the TV Streamer 2 to an analogue audio source
(E.g. TV or Hi-Fi stereo)
1. Connect the power supply to the wall socket and insert the cable into the
micro-USB socket on the TV Streamer 2.
2. Insert the male stereo mini-jack on the audio cable into the female stereo
mini-jack input on the TV Streamer 2 (4 on page 6).
3. Plug the other end audio cord into the ”AUDIO OUT” terminals on the
audio source.
4. The ”AUDIO OUT” is usually marked ”L – R” for left and right, and can
usually be found on the back of the audio source.
The TV Streamer 2 supports both analogue and digital audio input.
Please read the following sections for information about supported audio
formats and how to connect the TV Streamer 2 to audio sources.