User Manual
PT-HDBT-1002
4
SAFETY PRECAUTIONS
• To insure the best from the product, please read all instructions carefully before using the
device. Save this manual for further reference.
•
Unpack the equipment carefully and save the original box and packing material for possible
future shipment.
•
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to
persons.
•
Do not dismantle the housing or modify the module. It may result in electrical shock or
burn.
•
Using supplies or parts not meeting the products’ specifications may cause damage, deteri-
oration or malfunction.
•
Refer all servicing to qualified service personnel.
•
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
•
Do not put any heavy items on the extension cable in case of extrusion.
•
Do not remove the housing of the device as opening or removing housing may expose you
to dangerous voltage or other hazards.
•
Install the device in a place with fine ventilation to avoid damage caused by overheat.
• Keep the module away from liquids.
•
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an
object or liquid falls or spills on to the housing, unplug the module immediately.
• Do not twist or pull by force ends of the optical cable. It can cause malfunction.
•
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.
• Unplug the power cord when left unused for a long period of time.
•
Information on disposal for scrapped devices: do not burn or mix with general household
waste, please treat them as normal electrical wastes.
