User Manual
PT-IPAV-E2
20
9.2 Click “Factory Reset” on TX or RX.
10. After sale Service and Warranty.
11. How to use VLC
Step 1:
Make sure the Transmitter and PC are in the same domain.
(Refer to 5.1.1)
Step 2:
Connect the HDMI Source without HDCP with the transmitter and power on the device.
Step 3:
Connect the transmitter to the PC.
Step 4:
Check the Multicast Group on the web (refer to 5.1.3).
Step 5:
Open the VLC media Player, click “Stream”> “Network”, Input “UDP: //@ 239.255.42.42 :5004”
Note:
239.255.42.42 (Multicast Group) 5004 (Port)