PUREWASH ALTO 10 Getting Started Download

Page: 5 / 15

PUREWASH

Water cap

Battery cap

ON /OFF

Button

Water

reading

PPM

( parts per

million)

7. Your new system comes with a water quality meter. Use this to test the amount of minerals

in your water Simply take o

ﬀ

the water cap and fill it up with tap water and connect it back

onto the meter. Press on the On/O

ﬀ

button until you see the lcd turn on to test the water. The

reading will show a number in PPM ( parts per million). DO the same for the outlet quality of

the water from your PUREWASH system. Your system will show 0-3 ppm depending on the

calibration of the TDS meter. This indicates that there is no mineral content in the water. When

the reading reaches 20 ppm from your system, its time to change and renew the resin. *

PUREWASH LIMITED is not liable or responsible for any damage due to expired resin or fil-

ters, its up to the user to check water quality when using the system GO TO www.purewash.-

co.nz to replace your resin + filters.

TESTING WATER QUALITY

Summary of Contents for ALTO 10
















Search results

Summary of Contents for ALTO 10

Reviews:

Related manuals for ALTO 10

Brands by name

Popular brands

PUREWASH ALTO 10, Getting Started

Search results

Summary of Contents for ALTO 10

Reviews:

Related manuals for ALTO 10

Brands by name

Popular brands