2
3
Safety Notes
Heed all warnings. Failure to use the equipment in the manner specified
may impair the fixture from providing the desired protection.
According to the circumstances, the appropriate recommendations
made in these instructions must be made available, together with any
other relative information, to any company or person involved in the
installation of PURO Air products.
If the product is wrongly operated or a purpose other than its intended
use, liability cannot be accepted for any damage. The manufacturer will
not be responsible for damage to people, animals, and objects caused
by use or operation of the product contrary to these instructions.
As with all electrical products the safety information and precautions
contained in this booklet must be carefully observed, including following:
• Device is only intended for use within HVAC systems and in unit
ventilators, where there is no risk of accidental exposure.
• Ensure the product is switched and unplugged from the supply
mains before maintenance or cleaning.
• Installation, maintenance, and repairs should only be performed
by a qualified operator.
• Contact your PURO Lighting representative for repairs or
replacement
parts.
Improper repairs may damage the product, place the user at serious risk,
and void the warranty.
Fighter
— UV Air HVAC
Product Symbol Key
Specifically designed to disinfect
the air, our compact germicidal
UV-C Kit works with fan coils and
air handling units.
Recycle the lamps
according to your
local laws
Danger of electrical
shock; disconnect power
before installation or
maintenance
This device is RoHS
compliant
Appropriately recycle
the components of
this product
Danger
Use protective gloves
Consult the
instructions before
using the product
Danger of exposure to
UV-C radiation
Wear protective glasses
FT-2L-95-ID-VI
Warning
• Accidental exposure to UV-C radiation emitted by germicidal lamps
may cause severe conjunctivitis and erythema.
• Product is intended to be used as a germicidal lamp for disinfection.
• The lamp, as supplied, cannot be modified or designed for use with
accessories or tools.
• Ensure the device is turned off when performing maintenance
on the HVAC system.