Changing the world one Vehicle at a Time
PREVENTATIVE MAINTENANCE
All vehicles experience some level of wear over the course of operation. In addition to performing the
Routine Inspection listed in this manual, it is recommended that you perform preventative maintenance to
further ensure the optimal performance and service life of your vehicle, and for your safety. If you are
uncertain of how to perform any of the following preventative maintenance, seek professional service.
Preventative maintenance should include the following:
I.
GENERAL MAINTENANCE
a. Keep the motor differential clean to insure proper acceleration and dynamic performance.
b. Make sure the throttle rotates freely.
c. Make sure the hand brakes and parking brake are operational, including inspection of the brake
shoes for extreme wear or friction when applied.
d. Inspect the front and rear shock absorbers for damage and insure both are functioning properly.
e. Make sure all tires are properly inflated to the recommended psi.
f. Inspect all electrical components to make sure they are functioning properly.
g. Make sure all fasteners and screws are tightly secured throughout the Pushpak body.
h. Keep your Pushpak vehicle clean as a buildup of dirt and other substances can impair proper
functioning.
i. Make sure all lubrication points are well-oiled. Do not allow oil to leak onto the Pushpak.
j. Make sure the battery power cable and any attached wires within the battery compartment are
secure.
J.
FRONT BRAKE INSPECTION AND ADJUSTMENT
It is essential that the rear brake system, which is engaged by squeezing the left brake handle, be properly
adjusted to allow for adequate clearance while the Pushpak is moving, but still allow for effective braking.
This system is either drum or disc depending on your Pushpak model. Follow the appropriate inspection
and adjustments applicable to your Pushpak.
22
