Changing the world one Vehicle at a Time
NOTE: Clean any spilled brake fluid/oil immediately as it can corrode painted surfaces, plastic,
rubber parts, etc. Brake fluid/oil should always remain visible in the viewing window of the
reservoir during the exhausting process. To insure this, add brake fluid/oil to the main cylinder
at any time during the process.
L.
SHOCK ABSORBERS
a. Rear shock absorbers – Inspect the rear shock absorbers after every 125 miles of use. Replace the
shock absorbers immediately if looseness or cracks are found.
b. Front shock absorbers – Inspect the front shock absorbers regularly. Replace the shock absorbers
immediately if damage or failure is found.
Note: The front fork should be kept clean to insure proper functioning of the front shock
absorbers.
M.
TIRES AND WHEELS
a. Inspect the tires for cuts, embedded objects or other conditions/damage that can compromise the
tires' performance.
b. Inspect the tires for proper inflation. This inspection should always be performed while the tires are
"cold" before driving the vehicle. Recommended tire pressure varies on each model:
ETR1000 - 43 PSI ETR2000/ETR3000 - 36 PSI
ETR400 - Front 44-55 PSI, Rear 36 PSI ETR500HT - 36 PSI
c. Inspect the wheel rims for dents or distortions that can adversely
d.
e. Inspect the rear axle differential every week for proper function. Gear oil in the axle should be
changed approximately every 650 miles.
a. Add gear oil, if needed for proper lubrication.
b. For cold weather, use 80w/90 GL-3 gear oil. For warm weather, use 85w/90 GL-3 gear oil.
N.
BATTERY
40
