Changing the world one Vehicle at a Time
OPERATING YOUR PUSHPAK
CAUTION
Exercise due caution when operating your Pushpak in inclement weather and where
conditions on the road, sidewalk, or other driving areas may be hazardous.
Although your Pushpak is weather-resistant, prolonged exposure to moisture can potentially cause a
minor, temporary shut down in the vehicle's circuitry. This interruption will self-correct once the Pushpak
is allowed to dry out sufficiently.
AVOID is taking turns sharply and at high speed. This can result in tipping the Pushpak.
NEVER drive your Pushpak through standing water! Immersion of the motor, battery, or other electrical
components can cause short-circuited/or serious damage to those components.
I. IGNITION SWITCH
a. ON – To engage the electric motor and enable the Pushpak to be driven, insert the key into the
ignition and turn to the right or ON position. The key cannot be removed while it is in the ON
position.
b. OFF – To disengage the electric motor, turn the key to the left or OFF position. Power to the
Pushpak will be turned off, and the key can then be removed.
J. FORWARD/REVERSE SWITCH
a.
Forward – Depress the switch to the FORWARD (F) position to allow the Pushpak to drive
on when the throttle controller is engaged.
b.
Reverse – Depress the switch to the REVERSE (R) position to allow the Pushpak to drive in
reverse when the throttle controller is engaged. For safety, this setting also activates a beeping sound
as you drive in reverse to alert surrounding traffic of your movement.
28
