Changing the world one Vehicle at a Time
Avoid taking turns sharply and at high speed. This can result in tipping the Pushpak.
W.
SLOWING DOWN/BRAKING
In the United States, bicyclists are required to use a hand signal to alert surrounding traffic of their
intention to slow down or
Stop. Your Pushpak is equipped with rear braking lights, which activate when you engage either hand
break or which may be used in place of the hand signal. If the rear braking lights are not functional, you
should have the Pushpak serviced immediately for repair. The proper hand signal must be used if riding
the Pushpak without rear braking lights.
a. Braking: Release the throttle and squeeze both the front and rear hand brakes with equal pressure
until the Pushpak comes to a complete stop.
b. Slow Down: Release the throttle and squeeze both the front and rear hand brakes with enough
equal pressure to slow the Pushpak down to the desired speed.
X.
INSTRUMENT DISPLAY
a. Speedometer – Displays your current speed.
Note: Travel speed is impacted by the speed setting you select. Refer to section III Speed Setting
Switch for more information.
b. Battery Life Indicator – Displays the current battery life in bars and voltage.
c. Trip Odometer – Displays the mileage per trip/ignition.
Y.
HEADLIGHT
The headlight can be used whenever low visibility in natural light compromises the safe operation
of your Pushpak.
a. To turn the headlight on, move the switch to the ON position.
b. To turn the headlight off, move the switch to the OFF position.
30
